Continental Manufacturing, 800 S. Wellington, Richmond, MO 64085 866-704-3111 or 816- 776-3555 Continental Polymer Wall System Vinyl Siding Distributors Home
About Us / Contact Us Other Products Spec Sheet Continental Manufacturing

The Continental Polymer Wall System™ Featuring the
Patented Shure-Strāt® Attaching System
BASF Enhanced for Superior Performance

Benefits of the Polymer Wall System:

  • Energy Savings
  • High-Performance Quad R Insulation
  • Will not trap moisture in your walls
  • Non contributor of “sick home syndrome”
  • Allows your home to breathe
  • Designer Colors enhanced with BASF LURAN® S - prevents color fading
  • Superior impact resistance
  • Paintable
  • Lifetime Non Pro-Rated Transferable Limited Warranty

Rich-Lock™ Polymer Wall System with Shure-Strāt®


  • Wind & Storm Blow Off
  • Wavy Walls
  • Installation Errors
  • Hail Damage
  • Color Fading
  • Never Needs Painting

Synthetic polymers used for structural components weigh considerably less than metals, helping to reduce the consumption of fuel in vehicles and aircraft. They even outperform most metals when measured on a strength-per-weight basis. Polymers can also be used for engineering purposes such as gears, bearings, and structural members, removing any possibility of delamination for extreme weather or water damage.

The Continental Polymer Wall System is a permanent exterior wall renovation.

YES, I want more information on this exceptional product.

Materials to be supplied by Continental Manufacturing LLC, 800 S Wellington, Richmond, MO  64085.

All of the vinyl siding shall be extruded Poly Vinyl Chloride (PVC) and shall conform to the following requirements established by ASTM Specifications D 3679, developed in cooperation with the industry and published by the American Society for Testing and Materials.

Typical Compound Properties
Tensile Strength:  ASTM D638  6,040 psi
Tensile Modulus:  ASTM D638  365,000 psi
Flexural Strength:  ASTM D790  11,500 psi
Flexural Modulus:  ASTM D790  410,000 psi
Izod 73˚F Method A  17.0 ft-lb/in

VSI Flammability:  Burn Length (0.040 in Bar) ASTM D635 0* IN. Burn Time (0.040 in Bar) ASTM D635 0* Sec

Drop Dart Impact Resistance Procedure A, 73˚ F ASTM D4226 1.9 in-lb/mil
Drop Dart Impact Resistance Procedure B, 73˚ F ASTM D4226 4.0 in-lb/mil
Vulcanizate Properties Hardness Instantaneous, D ASTM D2240  83
Thermal Properties HDT  Unannealed, 264 psi  ASTM D648  162  ˚F
Coeff of Linear Thermal Expansion  ASTM D696  3.6EO in/in/˚F

Gloss: plus or minus 5 units, ASTM D3679
Surface Distortion: No Distortion at 105˚F, ASTM D3679
Weatherability:  No surface or structural defects when tested as per ASTM D3679

Siding Dimensions and Description
Horizontal siding panel, 9 in. wide exposure configured as two 4.5” in. panels duchlap or clapboard, 29’ and 16'8" lengths.
Horizontal siding panel, 9 in. wide exposure configured as a 3" over 6" panel, 29' and16'8" lengths.
Horizontal siding panel, 12 in. wide exposure configured as two 6' panels, clapboard 29' and16'8" lengths.
Thickness 0.048 in. ±0.002 in.
Embossed Wood Grain
Color to match the samples provided.
Interlock:  Siding panels are made with post form style lock with positive interlock.  Both ends of the panel are factory cut and notched for overlap.
Weep holes:  Small holes under the bottom butt prevent vapor build up and allow accumulated moisture to escape.

For additional information choose between our 15 and 30 minute videos on the Polymer Wall System

*Requires Flashplayer

*For questions or comments about this website please email

All content included on this web site including text, graphics, images, video clips and audio clips, is the property of Continental Manufacturing LLC-Independence, MO 64056 and protected by U.S. and international copyright laws. The collection, arrangement and assembly of all content on this site is the exclusive property of Continental Manufacturing LLC-Independence, Mo 64056 and protected by U.S. and international copyright laws. You may not copy, reproduce, distribute, publish, display, perform, modify, create derivative works, transmit, or in any other way exploit any part of copyrighted material without permission from Continental Manufacturing LLC-Independence, MO 64056. If you are interested in becoming a distributer please contact us at or fill out our online request form.